(MROC8) Level 4 Medium Risk Operator Competence for Single Waste Stream Open Inert Landfill CIWM (WAMITAB)

Onsite assessment based course Suitable for the following activities: - Single waste stream open inert landfill

Description

Qualification Process

 

Achievement of this qualification demonstrates competence by the learner to manage permitted waste facilities in England, Wales and Northern Ireland for the following site activities:


  • Single waste stream open inert landfill 

The process requires the Learner to demonstrate he or she has the required knowledge and skills to manage a permitted waste management facility.


The qualification process would include a number of visits by one of our competent Assessors. 


The first assessment visit will include an induction, to explain the process, as well as the Centre and awarding organisation’s policies, practices and procedures. 


Each Delegate will need to complete the 5 Mandatory units and one of the optional units listed below:


Mandatory Units:


• Maintain health and safety in the waste and resource management industry (OCS01) 

• Manage the environmental impact of work activities (OCS02)

• Manage the reception of inert waste on a single waste stream site (OCS16) 

• Manage the movement, sorting and storage of waste on single waste stream sites (OCS18) 

• Managing disposal operations of inert waste to landfill on a single waste stream site (OCS38)


Learners will then need to select one of the optional units: 


• Restore and prepare landfill sites for aftercare (OCS42)

• Developing restoration and aftercare schemes for inert landfill site (OCS45) 

• Prepare landfill sites for the acceptance of inert waste (OCS48)


As part of the process, you will be required to answer 6 question papers (One for each unit), gather documents relevant to your role such as risk assessments, environmental procedures, check sheets, permits, planning conditions and other such documents! On each document, you need to highlight relevant sections and also make notes as to your involvement with the document(s). 


Don’t worry, you will plan each assessment visit with your Assessor to allow time to complete the work required! 


When your Assessor arrives on site, he or she will be looking to observe you carrying out your daily duties, asking questions about the tasks you carry out, looking at the documentation and getting you to explain the various processes and procedures. 


On completion, the Centre will claim your certificate, which will be scanned, and a copy sent in advance of the original certificate. 

Similar courses

The CIWM (WAMITAB) Level 4 Certificate in Waste and Resource Management – VRQ is a taught and tested qualification and is the ideal way of gaining the appropriate qualification, as the Delegate is taught everything they need to know! It's open to anyone, from those who are new or preparing to work in the industry, those in haulage, sales, customer service or compliance teams, new or experienced waste supervisors or managers, who want to achieve technical competence for a permitted waste facility!

More Information

The CIWM (WAMITAB) Level 4 Certificate in Waste and Resource Management – VRQ is a taught and tested qualification and is the ideal way of gaining the appropriate qualification, as the Delegate is taught everything they need to know! It's open to anyone, from those who are new or preparing to work in the industry, those in haulage, sales, customer service or compliance teams, new or experienced waste supervisors or managers, who want to achieve technical competence for a permitted waste facility!

More Information

The CIWM (WAMITAB) Level 4 Certificate in Waste and Resource Management – VRQ is a taught and tested qualification and is the ideal way of gaining the appropriate qualification, as the Delegate is taught everything they need to know! It's open to anyone, from those who are new or preparing to work in the industry, those in haulage, sales, customer service or compliance teams, new or experienced waste supervisors or managers, who want to achieve technical competence for a permitted waste facility!

More Information

Hazardous Waste Training Course

More Information

Our training course is suitable for anyone, from those businesses producing waste be it offices, clothing stores, or garages right the way through to waste carriers, brokers and dealers, or permitted or exempt waste facilities.

More Information

This one-day course provides delegates with a clear understanding of Waste & Environmental Legislation. - Provide delegates with refresher training on Waste & Environmental Legislation - Explain the Legal Terms relevant to Waste & Environmental Management - Explain the Planning and Permitting requirements - Summarise specific legislation

More Information

In order to meet the requirements of the CIWM (WAMITAB) Operator Competence Scheme, technically competent managers must sit a Continuing Competence test every two years, to demonstrate their knowledge and skills have kept up to date with changes made across the waste management industry e.g. the introduction of new legislation, technologies and/or techniques. Therefore, all competent persons falling within the Scheme are required to demonstrate ‘Continuing Competence’ by completing a multiple-choice test.

More Information

he CIWM (WAMITAB) Level 1 in Waste and Recycling is the ideal Introduction to the world of Waste and Recycling. As a taught and tested qualification and is the ideal way of gaining the appropriate qualification, as the Delegate is taught everything they need to know! This qualification is open to anyone and doesn’t require you to have achieved any other qualifications previously.

More Information

The process starts with a two-day knowledge training course. This course will not only provide you with the knowledge and understanding to complete the written project and associated multiple-choice question test, but it will set you up for a career in health and safety in the waste management sector.

More Information

Onsite Assessment based course

More Information

Onsite Assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course

More Information

Onsite assessment based course Suitable for the following activities: - Non-Hazardous Clinical Waste Transfer

More Information

Onsite assessment based course Suitable for the following activities: - Waste Electronic and Electrical Equipment (Storage) - Metal Recycling Dry Scrap - In-house Storage of Non-Hazardous Waste

More Information

Onsite assessment based course. Suitable for the following activities: -Mobile Plant for treatment of waste to produce soil, soil substitutes and aggregate -Treatment of waste to produce soil, soil substitutes and aggregate

More Information

Onsite assessment based course Suitable for the following activities: -In-house storage of inert waste -Inert transfer

More Information

Onsite assessment based course. Suitable for the following activities: -Inert Physical Treatment

More Information

Onsite assessment based course. Suitable for the following activities: -Use of waste in Construction

More Information

Onsite assessment based course. Suitable for the following activities: - Hazardous waste transfer - Hazardous clinical waste transfer

More Information

Onsite assessment based course Suitable for the following activities: - Recovery of oil / organic solvents - Hazardous clinical waste treatment

More Information

Onsite assessment based course Suitable for the following activities: -Hazardous waste treatment (not covered below) -Recovery of Hazardous Waste -Recovery of oil / organic solvents -Hazardous Waste Disposal (not incineration or Landfill)

More Information

Onsite assessment based course Suitable for the following activities: -WEEE ATF – physical treatment -Treatment of asphalt waste containing coal tar -Recovery of refrigerants -End of Life Vehicle facilities (vehicle storage, depollution, and dismantling)

More Information

Onsite assessment based course Suitable for the following activities: - Contaminated Land Remediation

More Information

Onsite assessment based course This qualification suits operatives working in either collections, waste transfer and treatment facilities, WEEE recycling and more general waste operations! The mandatory units within the award cover health and safety, sustainability, communication and promoting recycling, whereas the optional unit group can be tailored to the individual looking at processing operations, waste acceptance, and use of plant equipment and machinery

More Information

Onsite assessment based course Suitable for the following activities: -Storage of Electrical Insulating Oil -Storage of Catalytic Converters -Storage and transfer of hazardous wastes included within SR2022No4 and SR2022No5, excluding asbestos (England only)

More Information

Onsite assessment based course Suitable for the following activities: - Open inert landfill

More Information

Onsite assessment based course Suitable for the following activities: - Closed inert landfill

More Information

Onsite assessment based course Suitable for the following activities: - Hazardous Waste Landfill (including Single Stream) activities

More Information

Onsite assessment based course Suitable for the following activities: - Non-Hazardous Waste Landfill (including Single Stream) activities

More Information

Onsite assessment based course Suitable for the following activities: - Closed Landfill activities

More Information

This is the ideal qualification for those in operative role. Assessed on site in the work environment, this qualification suits a range of site operations, from loading or unloading hazardous, non-hazardous or inert waste to aspiring or already appointed weighbridge operators or supervisors.

More Information

This is the ideal qualification for aspiring or already appointed supervisors. Assessed on site in the work environment, this qualification is suitable for a range of waste facilities. The mandatory units within the award cover customer service, communication and the more managerial/supervisory aspects. Whereas the optional unit groups can be tailored to the individual looking at processing operations, waste acceptance, environmental monitoring to name but a few.

More Information

This is the ideal qualification for those in an operative role regardless of facility type. The process starts with training course providing awareness of the waste and resource industry, and essential elements such as health and safety, environmental protection and sustainability. Once the training is complete, you will be required to complete a multiple choice question paper, covering a range of topics learnt during your training. This is a great way of ensuring your staff have the essential knowledge.

More Information

Delivered on site, you will be required to build up a portfolio of evidence to demonstrate competence in areas relevant to your roles and responsibilities. This will include a number of assessment visits by one of our competent assessors, who will set you tasks, provide mentoring and support as well as being on hand to guide you through the process!

More Information

Delivered on site, you will be required to build up a portfolio of evidence to demonstrate competence, in areas relevant to your roles and responsibilities. This will include a number of assessment visits by one of our competent assessors, who will set you tasks, provide mentoring and support as well as being on hand to guide you through the process!

More Information

This qualification is assessed using variable methods of assessment, which ultimately depend on the units selected. Some units are made up of knowledge and therefor require the Learner to complete a range of knowledge questions, while other units are based around practical implementation of processes and procedures. This process would be assessed on site in the work environment to allow the Learner to demonstrate he or she has the required knowledge and skills to supervise waste activities.

More Information

This qualification has two pathways, the first being a general pathway suitable for a range of individuals such as those employed at transfer stations, HWRC's or waste collections. The second pathway is re-use, which is suitable for charity shops and other re-use facilities. Delivered on site, you will be required to build up a portfolio of evidence to demonstrate competence, in areas relevant to your roles and responsibilities.

More Information

This qualification is suitable for aspiring or already appointed senior managers or Director working in areas of the business either, inside or outside of the scope of the Quarry Regulations 1999. Those managers or Directors involved in cement, asphalt (tar) plants, or block works, would complete pathway 1 only to achieve this qualification.

More Information

This qualification is suitable for aspiring or already appointed supervisors or managers working in areas of the business either, inside or outside of the scope of the Quarry Regulations 1999. Those supervising or managing cement, asphalt (tar) plants, or block works, would complete pathway 1 only to achieve this qualification. Those operating under the full scope of the regulations would be required to complete pathways 1 and 2.

More Information

This qualification is suitable for aspiring or already appointed supervisors or managers working in areas of the business either, inside or outside of the scope of the Quarry Regulations 1999. Those supervising or managing cement, asphalt (tar) plants, or block works, would complete pathway 1 only to achieve this qualification.

More Information

This qualification is designed for those individuals who are responsible for the planning, implementation and supervision of maintenance activities and personnel within mineral products operations. To achieve this qualification, learners must complete all seven of the mandatory units. Completing this qualification demonstrates the learner's competence to supervise maintenance activities.

More Information

This qualification is aimed at mobile and static plant, or other operators who are required to undertake some form of basic maintenance as part of their job role. This qualification is not appropriate for fitters or Learners who carry out maintenance as their main job role. Those Learners should instead undertake the Level 3 Diploma in Maintenance for Mineral Products Operations.

More Information

This qualification is designed for individuals who carry out maintenance and/or fabrication activities on mobile and/or fixed plant. Typically Learners would be individuals who carry out maintenance activities in a range of applications based on experience and internal training with no formal qualifications.

More Information